 |
|
| Technical Data | August 2006 |
|
|
|
GENERAL DESCRIPTION:
WG series furnaces and kilns have an inner "heat box" surrounded by an air gap set in a steel outer casing.
In the WG series the working insulation face is lightweight insulating firebrick for wear resistance in the lower section but the lid is lined with lightweight fibre for ease of use.
A sheathed thermocouple within the chamber gives accurate temperature sensing.
The electrical controls are mounted in a box to the side of the kiln case. Temperature control is achieved through a separate unit connected to the control box by a flexible cable and normally attached to the side of the kiln near the top for easy operation. The temperature controller incorporates thermocouple break protection as standard.
A choice of PID digital controllers with digital setting and readout are offered. A door safety switch is fitted to all models. Various optional extras are available.
| Product | Max Temp°C | Internal Dimensions (mm) | Volume | Power requirement | Weight | ||||
|---|---|---|---|---|---|---|---|---|---|
| Width | Height | Breadth front to back | Litres | kW | Volts | kg | |||
| WG 60 | 1000 | 500 | 250 | 500 | 60 | 4.5 | 400 3ph, N | 250 | |
| WG 130 | 1000 | 500 | 270 | 1000 | 130 | 9 | 400 3ph, N | 400 | |
| WP 320 | 1000 | 800 | 270 | 1500 | 320 | 15 | 400 3ph, N | 700 | |
All ovens will operate on 415V 3ph, N, E, supply.
The above data is offered only as general performance characteristics and may alter due to mains voltage fluctuations and modifications etc. Dimensions are in mms.
