Burntstone
CERAMIC   LIMITED

Technical Data August 2006

Front loading studio and workshop kilns with lift up door
WT series furnaces to 1340°C
Studio kiln
 
  • 4 Standard sizes
  • Safe, simple and economical to use
  • Automatic control with indication
  • High efficiency, low thermal mass insulation
  • Over temperature protection
  • Mechanically driven doors

     

    		•

    GENERAL DESCRIPTION:

    WT series furnaces and kilns have an inner "heat box" surrounded by an air gap set in a steel outer casing.

    In the WT series the working insulation face is lightweight insulating firebrick for greater strength and wear resistance.

    A sheathed thermocouple within the chamber gives accurate temperature sensing. The full width door allows obstruction-free access and is mechanically driven to reduce operator stress.

    The electrical controls are mounted in a box to the side of the kiln case. Temperature control is achieved through a separate unit connected to the control box by a flexible cable and normally attached to the side of the kiln near the door for easy operation. The temperature controller incorporates thermocouple break protection as standard.

    A choice of PID digital controllers with digital setting and readout are offered. A door safety switch is fitted to all models.  Various optional extras are available.

    ProductMax Temp°CInternal Dimensions (mm)VolumePower requirementWeight
    Width HeightDepth Litres kWVoltskg
    WT 60 1260 400 300 500 60 15 400 300
    WT 100 1260 500 300 700 105 22 400 400
    WT 200 1260 700 300 1000 210 35 400 500
    WT 360 1260 700 400 1300 364 45 400 1000


    All kilns will operate on 415V 3ph, N, E, supply. Kilns can be supplied with 900, 1260 or 1340°C maximum operating temperature.

    The above data is offered only as general performance characteristics and may alter due to mains voltage fluctuations and modifications etc. Dimensions are in mms.

    The information and data herein are offered solely for your consideration and guidance and are not to be construed as a warranty or specification. Nothing contained herein is to be interpreted as authorisation to practice a patented invention without a licence.
    E-mail us
    E-mail us     		Thermal Insulation Dryers Refractories
    Applications
    Guidance
    Annealing furnaces,
    & ovens    		 New furnaces
    Used furnaces, kilns
    & ovens summary     		Home
    Used ovens
    Environmental     		Used ovens - Drying Used ovens - Annealing
    Used furnaces - Low temp. Used furnaces - Medium temp. Used furnaces - High temp.